Reference Guide

graceful-restart t2
Configure the wait time for the graceful restart timer T2 that a restarting router uses as the wait time for
each database to synchronize.
C9000 Series
Syntax
graceful-restart t2 {level-1 | level-2} seconds
To return to the default, use the no graceful-restart t2 command.
Parameters
level-1, level-2 Enter the keywords level-1 or level-2 to identify the
database instance type to which the wait interval applies.
seconds Enter the gracefule-restart t2 time in seconds. The
range is from 5 to 120 seconds. The default is 30 seconds.
Defaults 30 seconds
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced on the E-Series.
graceful-restart t3
Configure the overall wait time before graceful restart completes.
C9000 Series
Syntax
graceful-restart t3 {adjacency | manual} seconds
To return to the default, use the no graceful-restart t3 command.
1000
Intermediate System to Intermediate System (IS-IS)