Reference Guide

Defaults Not configured.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Introduced on the E-Series.
Usage Information
Configure a network entity title (the net command) to specify the area address and
the router system ID.
To establish adjacencies and establish dynamic routing, enable routing on one or
more interfaces.
You can configure only one IS-IS routing process to perform Level 2 routing. A
level-1-2 designation performs Level 1 and Level 2 routing at the same time.
Related
Commands
• net — configures an IS-IS network entity title (NET) for the routing process.
• is-type — assigns a type for a given area.
isis circuit-type
Configure the adjacency type on interfaces.
C9000 Series
Syntax
isis circuit-type {level-1 | level-1-2 | level-2-only}
To return to the default values, use the no isis circuit-type command.
1006
Intermediate System to Intermediate System (IS-IS)