Reference Guide

redistribute bgp
Redistribute routing information from a BGP process.
C9000 Series
Syntax
redistribute bgp AS number [level-1| level-1-2 | level-2]
[metric metric-value] [metric-type {external| internal}]
[route-map map-name]
To return to the default values, use the no redistribute bgp command with
the appropriate parameters.
Parameters
AS number Enter a number that corresponds to the autonomous
system number. The range is from 1 to 65355.
level-1 (OPTIONAL) Routes are independently redistributed into IS-
IS Level 1 routes only.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-
IS Level 1 and Level 2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-
IS as Level 2 routes only. This setting is the default.
metric metric-
value
(OPTIONAL) The value used for the redistributed route. Use
a metric value that is consistent with the destination
protocol. The range is from 0 to 16777215. The default is 0.
metric-type
{external| internal}
(OPTIONAL) The external link type associated with the
default route advertised into a routing domain. The two
options are:
• external
• internal
route-map map-
name
map-name is an identifier for a configured route map. The
route map filters imported routes from the source routing
protocol to the current routing protocol.
If you do not specify a map-name, all routes are
redistributed. If you specify a keyword, but fail to list route
map tags, no routes are imported.
Defaults IS-IS Level 2 routes only
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Intermediate System to Intermediate System (IS-IS)
1031