Reference Guide

local (OPTIONAL) Displays local link-state database information.
detail (OPTIONAL) Detailed link-state database information of
each LSP displays when specified. If not specified, a
summary displays.
summary (OPTIONAL) Summary of link-state database information
displays when specified.
system-id (OPTIONAL) Display link-state database for system-id.
lspid (OPTIONAL) Display only the specified LSP.
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of
the VRF to display IS-IS link state database corresponding to
that VRF.
NOTE: If you do not specify this option, the IS-IS link
state database corresponding to the default VRF are
displayed.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Added supported for VRF. Introduced on the S6000-ON.
9.5(0.1) Inroduced on the Z9500.
9.2(0.2) Introduced on the Z9000.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.1 Introduced on the S4810.
Usage Information The following describes the show isis database command shown in the
following example.
Field Description
IS-IS Level-1/
Level-2 Link State
Database
Displays the IS-IS link state database for Level 1 or Level 2.
1038
Intermediate System to Intermediate System (IS-IS)