Reference Guide

clear host
Remove one or all dynamically learned host table entries.
C9000 Series
Syntax
clear host name
Parameters
name Enter the name of the host to delete. Enter * to delete all
host table entries.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
clear ip fib linecard
Clear all FIB entries on a line card (use this command with caution; refer to Usage Information.)
C9000 Series
Syntax
clear ip fib linecard slot—id
Parameters
linecard slot-id Enter the slot ID of a line card. Valid slot IDs are from 0 to 2.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
IPv4 Routing
1097