Reference Guide

interface interface To specify an interface, enter one of the following interface
types and slot/port or number information:
• For Loopback interfaces, enter the keyword loopback
then a number from zero (0) to 16383.
• For a Port Channel interface, enter the keyword port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
• For a tunnel interface, enter the keyword tunnel.
• For a port extender (PE) Gigabit Ethernet interface, enter
the keyword peGigE then the pe-id/ stack-unit unit
number /port-ID information.
linecard slot-id (OPTIONAL) Enter the interface port-type slot/
port parameters to display the ARP entries learned on a
Z9500 port. The range of slot IDs is from 0 to 2.
ip ip-address
mask
(OPTIONAL) Enter the keyword ip with an IP address in the
dotted decimal format to display the ARP entries learned
with this IP address. Enter the optional IP address mask in
the slash prefix format (/ x).
macaddress mac-
address mask
(OPTIONAL) Enter the keyword macaddress with a MAC
address in nn:nn:nn:nn:nn:nn format to display the ARP
entries learned with this MAC address. Enter the optional
MAC address mask in nn:nn:nn:nn:nn format also.
static (OPTIONAL) Enter the keyword static to display manually-
entered ARP entries.
dynamic (OPTIONAL) Enter the keyword dynamic to display
dynamically-learned ARP entries.
summary (OPTIONAL) Enter the keyword summary to view a summary
of ARP entries.
Default Display only the ARP entries learned on the Control Processor.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
IPv4 Routing
1131