Reference Guide

• L2 ACL(l2acl): 5
• IPv6 L3 ACL (ipv6acl): 0
• L3 QoS (ipv4qos): 2
• L2 QoS (l2qos): 1
• OpenFlow: 0 (disabled)
• FCoE (fcoeacl): 0 (disabled)
• iSCSI Optimization (iscsioptacl): 0 (disabled)
• L2 PT : 0
• IP-MAC ACL : 0
• Vman QoS : 0
• ECFM ACL: 0
• IPv4 PBR : 0
• VRFv4 ACL : 0
• FedGov ACL : 0
• NLB Cluster ACL : 0
l2acl number
Allocate space to each CAM region.
Enter the CAM profile name then the amount for CAM space
allocation. The total space allocated must be equal to 12.
The IPv6 ACL range must be a factor of 2.
Enter l2acl and the FP block number for L2 ACL. The FP
block number range is from 1 to 8.
• 4: Creates 242 entries for use by the OpenFlow
controller (256 total entries minus the 14 entries
reserved for internal functionality)
• 8: Creates 498 entries for use by the OpenFlow
controller (512 total entries minus the 14 entries reserved
for internal functionality)
ipv4acl number
Enter ipv4acl and the FP block number for IPv4. The FP
block number range is from 0 to 8.
ipv6acl number
Enter ipv6acl and the FP block number for IPv6. The FP
block number range is from 0 to 4 (multiples of 2).
ipv4qos number
Enter ipv4qos and the FP block number for IPv4–QoS. The
FP block number range is from 0 to 8.
l2qos number
Enter l2qos and the FP block number for L2–QoS. The FP
block number range is from 1 to 8.
1160
IPv6 Access Control Lists (IPv6 ACLs)