Reference Guide

l2pt number
Enter l2pt and the FP block number for L2–Protocol
tunneling. The FP block number range is from 0 to 1.
ipmacacl number
Enter ipmacacl and the FP block number for IP-MAC ACL.
The FP block number range is from 0 to 6.
vman-qos
number
Enter vman-qos and the FP block number for Vman QoS.
The FP block number range is from 0 to 6.
ecfmacl number
Enter ecfmacl and the FP block number for ECFM ACL. The
FP block number range is from 0 to 5.
fcoeacl number
Enter fcoeacl and the FP block number for FCoE ACL. The
FP block number range is 0 to 6.
fedgovacl number
Enter fedgovacl and the FP block number for Fed Gov
ACL. The FP block number range is 0 to .
nlbclusteracl
number
Enter nlbclusteracl and the FP block number for NLB
Cluster ACL. The FP block number range is 0 to 6.
ipv4pbr number
Enter ipv4pbr and the FP block number for IPv4 PBR ACL.
The FP block number range is 0 to 6.
iscsioptacl
number
Enter iscsioptacl and the FP block number for ISCSI
optimization ACL. The FP block number range is 0 to 6.
openflow number
Enter openflow and the FP block number for OpenFlow
ACL. The FP block number range is 0 to 6.
vrfv4acl number
Enter vrfv4acl and the FP block number for VRF ACL. The
FP block number range is 0 to 6.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
IPv6 Access Control Lists (IPv6 ACLs)
1161