Reference Guide

cam_count List the count of the CAM rules for this ACL.
interface interface Enter the keyword interface and the interface type and
slot/port or number information:
• For a Port Channel interface, enter the keywords port-
channel
a port channel number.The range is from 1 to
128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet and the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE and the slot/port information.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.0.2.0 Introduced on the S6000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.4.2.1 Introduced on the S-Series.
8.2.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the C-Series. Increased the name string to
accept up to 140 characters. Prior to version 7.8.1.0, names
are up to 16 characters long.
7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information
Field Description
“Ingress IPv6...” Displays the name of the IPv6 ACL, in this Example
“AclList1”.
“seq 10...” Displays the filter. If the keywords count or byte were
configured in the filter, the number of packets or bytes
processed by the filter is displayed at the end of the line.
Example
Dell#show ipv6 accounting access-list
!
Ingress IPv6 access list V6-ACL on TenGigabitEthernet 10/1
Total cam count 2
1182
IPv6 Access Control Lists (IPv6 ACLs)