Reference Guide

connected (OPTIONAL) View only the directly connected IPv6 routes.
isis (OPTIONAL) View information for all IPv6 IS-IS routes.
list (OPTIONAL) View the IPv6 prefix list.
ospf (OPTIONAL) View information for all IPv6 OSPF routes.
vrf vrf-name (Optional) Enter the keyword vrf and the name of the VRF to
display IPv6 routes corresponding to that VRF.
NOTE: If you do not specify this option, routes
corresponding to the default VRF are displayed.
rip (OPTIONAL for E-Series only) View information for all IPv6
RIP routes.
static (OPTIONAL) View only routes configured by the ipv6
route command.
summary (OPTIONAL) View a brief list of the configured IPv6 routes.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON.
9.7(0.1) Introduced on the S4048-ON.
9.7(0.0) Added support for VRF. Introduced on S6000–ON
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information The following describes the show ipv6 route command shown in the following
examples.
1210
IPv6 Basics