Reference Guide

• show iscsi session detailed— displays detailed information about active iSCSI
sessions on the switch.
• show run iscsi— shows run iscsi.
show iscsi session
Display information about active iSCSI sessions on the switch.
C9000 Series
Syntax
show iscsi session
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.6(0.0) Introduced on the Z9500.
Example
Dell# show isci session
Session 0:
------------------------------------------------------
Target: iqn.2001-05.com.equallogic:
0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
---------------------------------------------------------
Target: iqn.2001-05.com.equallogic:
0-8a0906-0f60c2002-0360018428d48c94-iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
Usage Information
The switch learns only the active sessions which it observes; sessions flowing
through an adjacent switch are not learned.
After you reload the switch, session information exchanged during the initial
handshake is not available. If the switch picks up session communication after
reloading, it detects iSCSI sessions in progress but sometimes cannot obtain
complete session information. Incomplete information about active iSCSI sessions
is not displayed in show iscsi session command output.
iSCSI Optimization
1219