Reference Guide

From a PE console, use show inventory [media] to view the PE inventory
information.
Parameters
media slot-id (OPTIONAL) Enter the keyword media to display pluggable
media inventory for a specified line-card slot. Valid slot IDs
are from 0 to 2.
pe pe-id (OPTIONAL) Enter the keyword pe to display port extender
(PE) inventory for a specified PE ID. Range is from 0 to 255.
NOTE: The pe option is only available when the
extended bridge feature is enabled.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.4 Output expanded to include Piece Part ID (PPID) and eSR4
optics.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced this version of the command for S-Series. S-
Series output differs from E-Series.
Usage Information Use the show inventory command to display information about installed
pluggable media (QSFP, SFP) on a line card. If no optics are installed in the fiber
ports, the output displays Media not present or accessible.
When feature extender bridge is enabled on C9000, the pe option displays port
extender inventory for a specified PE.
Example
Dell#show inventory
Chassis Type : C9010
Chassis Mode : 1.0
Software Version : 1-0(0-4079)
Slot Type Serial Number Part Number Rev Piece Part ID Rev Svc Tag ExprsSvc
Code
0 C9010 NA 0500WH X00 CN-0500WH-77931-4A7-0009 X00
16DQG02 256 264 819 4
0 C9000LC2410G 04D4GD X00 CN-04D4GD-77931-4A8-0013 X00
16NQG02 257 944 435 4
1 C9000LC2410G 04D4GD X00 CN-04D4GD-77931-4A7-0015 X00
16HTG02 256 950 662 6
122
Control and Monitoring