Reference Guide

auto-cost
Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
C9000 Series
Syntax
auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type,
use the no auto-cost [reference-bandwidth] command.
Parameters
ref-bw (OPTIONAL) Specify a reference bandwidth in megabits per
second. The range is from 1 to 4294967. The default is 100
megabits per second.
Defaults 100 megabits per second.
Command Modes ROUTER OSPFv3
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
clear ip ospf
Clear all OSPF routing tables.
C9000 Series
Syntax
clear ip ospf process-id [vrf {vrf name}]|[process]
Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
vrf name Enter the VRF process identifier to tie the OSPF instance to
the VRF. All network commands under this OSPF instance
are then tied to the VRF instance.
process (OPTIONAL) Enter the keyword process to reset the OSPF
process.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Open Shortest Path First (OSPFv2 and OSPFv3)
1395