Reference Guide

• Any adjacency is explicitly terminated from all OSPF interfaces.
• All previous passive-interface interface commands are removed from
the running configuration.
• All previous no passive-interface interface commands are removed
from the running configuration.
no passive-interface interface
• Remove the interface from the passive list.
• The ABR status for the router is updated.
• If passive-interface default is specified, then save no passive-
interface interface into the running configuration.
No passive-interface default
• Clear everything and revert to the default behavior.
• All previously marked passive interfaces are removed.
• May update ABR status.
redistribute
Redistribute information from another routing protocol throughout the OSPF process.
C9000 Series
Syntax
redistribute {connected | rip | static} [metric metric-value |
metric-type type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | isis |
rip | static} command.
Parameters
connected Enter the keyword connected to specify that information
from active routes on interfaces is redistributed.
rip Enter the keyword rip to specify that RIP routing
information is redistributed.
static Enter the keyword static to specify that information from
static routes is redistributed.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number. The
range is from 0 (zero) to 16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
1426
Open Shortest Path First (OSPFv2 and OSPFv3)