Reference Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1471

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Added support for VRF on all platforms ( Except MXL and

STOMP ).

9.1.(0.0) Introduced on the S4810 and Z9000.

8.3.19.0 Introduced on the S4820T.

7.8.1.0 Added support for C-Series.

7.4.1.0 Introduced on the E-Series.

clear ipv6 route

Clear (refresh) all or a specific route from the IPv6 routing table.

C9000 Series

Syntax

clear ipv6 route {* | ipv6-address prefix-length }[vrf vrf-

name]

Parameters

* Enter the * to clear (refresh) all routes from the IPv6 routing

table.

ipv6-address

prefix-length

Enter the IPv6 address in the x:x:x:x::x format then the prefix

length in the /x format. The range is from /0 to /128.

NOTE: The :: notation specifies successive hexadecimal

fields of zeros.

vrf vrf-name (Optional) Enter the keyword vrf and the name of the VRF

to clear the IPv6 routes corresponding to that VRF.

Command Modes EXEC Privilege