Reference Guide

• For a VLAN, enter the keyword vlan then a number
from 1 to 4094.
Defaults Enabled, that is sending of routing updates are enabled by default.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced support for OSPFv3 on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information
By default, no interfaces are passive. Routing updates are sent to all interfaces on
which the routing protocol is enabled.
If you disable the sending of routing updates on an interface, the particular address
prefix continues to be advertised to other interfaces, and updates from other
routers on that interface continue to be received and processed.
OSPFv3 for IPv6 routing information is not sent or received through the specified
router interface. The specified interface address appears as a stub network in the
OSPFv3 for IPv6 domain.
redistribute
Redistribute into OSPFv3.
C9000 Series
Syntax
redistribute {bgp as number}{connected | static}[metric metric-
value | metric-type type-value] [route-map map-name] [tag tag-
value]
To disable redistribution, use the no redistribute {connected | static}
command.
1498
Open Shortest Path First (OSPFv2 and OSPFv3)