Reference Guide

Related
Commands
show ip ospf interface—Display the OSPF interfaces configured.
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs).
C9000 Series
Syntax
show ipv6 ospf [process-number] [vrf vrf-name] database
[database-summary | grace-lsa]
Parameters
process-number Enter the OSPF process number.
vrf vrf-name (Optional) Enter the keyword vrf and the name of the VRF to
display neighbors corresponding to that VRF.
NOTE: If you do not specify this option, neighbors
corresponding to the default VRF are displayed.
database-
summary
(OPTIONAL) Enter the keywords database-summary to
view a summary of database LSA information.
grace-lsa
(OPTIONAL): Enter the keywords grace-lsa to display the
Type-11 Grace LSAs sent and received on an OSPFv3 router.
Defaults none
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Added support for VRF on all platforms ( Except MXL and
STOMP )
9.1.(0.0) Added support for OSPFv3 on the S4810 and Z9000.
8.4.2.2 Added support for the display of graceful restart parameters
and Type-11 Grace LSAs on E-Series TeraScale routers.
8.3.19.0 Introduced on the S4820T.
1508
Open Shortest Path First (OSPFv2 and OSPFv3)