Reference Guide

Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010 and C1048P.
Usage Information
In a PE stack setup (master unit), use the telnet-peer-stack-unit command to
open a telnet session to the port extender standby unit.
After connecting to the standby unit, you can access the following subset of
commands:
Dell(standby)#?
cd Change current directory
copy Copy from one file to another
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
format Format a filesystem
pwd Display current working
directory
rename Rename a file
reset Reset selected card
show PE Show running system
information
telnet-peer-stack-unit Open a telnet connection to
the peer stack-unit
Example
Dell#telnet-peer-stack-unit
Trying Unit 2...
Connected to Unit 2.
Exit character is '^]'.
Login: admin
Password:
Jun 24 10:14:11: %PE-UNKN-UNIT2-S:CP %SEC-5-LOGIN_SUCCESS:
Login successful for user admin on line vty0 ( Unit 3 )
Dell(standby)>en
Dell(standby)#exit
Session terminated for user admin on line vty 0 ( Unit 3 )
Closed connection.
Dell#Jun 24 10:14:29: %PE-UNKN-UNIT2-S:CP %SEC-5-LOGOUT: Exec
session is terminated for user admin on line vty0 ( Unit 3 )
PE Console Commands
1527