Reference Guide

Jun 24 15:21:26: %PE255-UNIT1-M:CP %CHMGR-5-FANTRAY_INSERTED: Fan tray
0 of Unit 2 is inserted
Jun 24 15:21:26: %PE255-UNIT1-M:CP %CHMGR-0-PS_UP: Power supply 0 in
unit 2 is up
Jun 24 15:21:26: %PE255-UNIT1-M:CP %CHMGR-0-PS_UP: Power supply 1 in
unit 2 is up
Jun 24 15:21:26: %PE-UNKN-C1048P:2 %CHMGR-2-FAN_SPEED_CHANGE: Fan speed
changed to 60 % of the full speed
Jun 24 15:21:26: %PE255-UNIT1-M:CP %IFMGR-5-OSTATE_UP: Changed
interface state to up: Te 2/48
Jun 24 15:21:27: %PE-UNKN-C1048P:2 %CHMGR-2-FAN_SPEED_CHANGE: Fan speed
changed to 75 % of the full speed
Jun 24 15:21:27: %PE255-UNIT1-M:CP %CHMGR-4-TEMP_STATUS_CHANGE: Unit 2
temperature state changed to 1 (Current temperature 35C).
Related
Commands
• reload – reboots the Dell Networking OS.
show pe system
Display information on all the system components of a port extender on a stack.
C9000 Series
Syntax
show pe pe-id system [ brief | stack-port [status | topology] |
stack-unit unit number ]
Parameters
pe-id Enter the port extender ID pe-id to view the port extender
system status and details. Range is from 0 to 255.
brief (Optional) Enter the keyword brief to view a short
summary of the port extender system status.
stack-port (Optional) Enter the keyword stack port to view the
stack port information.
status (Optional) Enter the keyword status to view the status of
the stack ports when there is a PE stack configuration.
topology (Optional) Enter the keyword topology to view the
topology information when there is a PE stack configured.
Topology for a PE stack can be: daisy chain or ring.
stack-unit unit
number
(Optional) Enter the keyword stack-unit and a stack unit
number to view information on a specified stack-unit in
detail. Stack unit range is from 0 to 7.
Default None
Command Modes
• EXEC
• EXEC Privilege
PE Stacking
1533