Reference Guide

stack-unit unit-
number
Enter the keyword stack-unit and the unit number. The stack-
unit range is from 0 to 7.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the
relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced save to the file options.
7.6.1.0 Introduced on the S-Series.
Usage Information
Without the page or linecard option, the command output is continuous. To
interrupt the command output, use Ctrl-z.
The save option works with other filtering commands. This allows you to save specific
information of a
show command. The save entry must always be the last option. For
example:
Dell#show tech-support |grep regular-expression |except
regular-expression | find regular-expression | save flash://result
This display output is an accumulation of the same information that is displayed when you
execute one of the following show commands:
• show clock
• show environment
• show HA information
• show interface
• show inventory
• show processes cpu
• show processes cpu summary
• show processes memory
• show running-conf
• show system stack-ports
• show version
Example
Dell#show tech-support linecard 0
----------------------------------- show version
---------------------------
Dell Real Time Operating System Software
Control and Monitoring
155