Reference Guide
41
PIM-Source Specific Mode (PIM-SSM)
The protocol-independent multicast source-specific mode (PIM-SSM) commands in this section are
supported in the Dell Networking operating system.
IPv4 PIM Commands
The following commands apply to IPv4 PIM-SM, IPv4 PIM-SSM, and PIM-DM.
• clear ip pim tib
• debug ip pim
• ip pim dr-priority
• ip pim neighbor-filter
• ip pim query-interval
• show ip pim interface
• show ip pim neighbor
• show ip pim tib
clear ip pim tib
Clear PIM tree information from the PIM database.
C9000 Series
Syntax
clear ip pim tib [group]
Parameters
group (OPTIONAL) Enter the multicast group address in dotted
decimal format (A.B.C.D).
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
1558
PIM-Source Specific Mode (PIM-SSM)