Reference Guide

Field Description
• v2 = PIM version 2
DR prio/Mode Displays the Designated Router priority and the mode:
• 1 = default Designated Router priority (use the ip pim
dr-priority command)
• DR = Designated Router
• S = Sparse mode
Example
Dell#show ip pim snooping neighbor
Neighbor Interface Uptime/Expires Ver DR Prio
Address
165.87.32.2 Vl 2 [Te 1/13 ] 00:04:03/00:01:42 v2 1
165.87.32.10 Vl 2 [Te 1/11 ] 00:00:46/00:01:29 v2 0
165.87.32.12 Vl 2 [Te 41/20 ] 00:00:51/00:01:24 v2 0
show ip pim interface
View information on the interfaces with IP PIM enabled.
C9000 Series
Syntax
show ip pim interface
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
PIM-Sparse Mode (PIM-SM)
1591