Reference Guide

show ecid
Display the E-Channel identifier (ECID) information for all or any specified interfaces.
C9000 Series
Syntax
show ecid {interface [interface] | pe pe-id stack—unit unit-
number}
Parameters
interface interface
Enter the interface keyword, and specify one of the
following interface types:
• For a PE Gigabit Ethernet interface, enter the keyword
peGigE. You must specify a pe-id/stack-unit/port-id for
the interface.
• For a port channel interface, enter the keyword port-
channel
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
.
multicast Enter the keyword multicast to view the ECID information
for a multicast interface.
pe pe-id Enter the keyword pe keyword and specify a port extender
ID number. Range is from 0 to 255.
stack-unit unit-
number
Enter the keyword stack-unit and the unit number.
Range is from 0 to 7.
Default
None
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information Use the show ecid command to view the E-Channel Identifier (ECID) information
for a specified interface such as a port extender Gigabit Ethernet (peGigE) interface.
Example
Dell#show ecid pe 255
-----------------------
Port Extenders (PE)
1621