Reference Guide

ecp Enter the keyword ecp followed by the trace-flags
number to display the BRM edge control protocol (ecp)
debug information. Range is from 0 to FFFFFFFF.
Default None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
debug pe-csp interface
Display the packets filtered for a specified port extender csp interface.
C9000 Series
Syntax
debug pe-csp interface port—channel number packets {rx | tx |
both [brief | detail {count value}]
Parameters
interface interface
Enter the interface keyword and specify the cascade
port-channel as the interface type.
port-channel
number
Enter the keyword port-channel and a cascade port-
channel ID number. Cascade port-channel ID range is from
form 258 to 513.
packets (Optional) Enter the keyword packets to display
information regarding the packets coming in or going out.
both (Optional) Enter the both keyword to display both receive
and transmit pe-csp packet information.
tx (OPTIONAL) Enter the keyword tx to display transmit-only
pe-csp packet information.
rx (OPTIONAL) Enter the keyword rx to display receive-only
pe-csp packet information.
brief (OPTIONAL) Enter the keyword brief to display pe-csp
packet information in brief.
detail (OPTIONAL) Enter the keyword detail to display pe-csp
packet information in detail.
1630
Port Extenders (PE)