Reference Guide

Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information
The power inline legacy command allows the system to detect and allocate
inline power to the legacy devices on a Port Extender.
Example
Dell(conf)#power inline legacy pe 0 stack-unit 0
power inline mode
Configures PoE power management mode for a specified port extender.
C9000 Series
Syntax
power inline mode {pe pe-id stack-unit unit number class |
static }
Parameters
pe pe-id Enter the keyword pe and port extender ID. Range is 0–255.
stack-unit unit
number
Enter the keyword stack-unit and the unit number.
Range is 0–7.
class Enter the keyword class to configure the class mode for
the specified port extender.
static Enter the keyword static to configure the static mode for
the specified port extender.
Defaults Static
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information
The power inline mode command allows you to manage inline power supply
on the port extender (PE) ports. You can configure class or static mode to
manage inline power in a port extender.
Port Extenders (PE)
1649