Reference Guide

Power Reserved for inline Power: 1612W
Total Inline Power Consumed: 21W
Remaining inline power Available: 1580W
Power Management Mode: Class
Interface Inline Power Inline Power Class
Device PoE Port LLDP
Max / Alloc Consumed
Type Priority Support
(Watts) (Watts)
------------- ------------ ------------ -------
------ -------- ------
PeGi 255/0/0 30.00/21.40 21.50 4
2 low 0
show power detail
Display the inline power consumption details for a port extender.
C9000 Series
Syntax
show power detail {pe pe-id stack-unit unit number}
Parameters
pe Enter the keywordpe and the port externder ID. Range is 0–
255.
stack-unit Enter the stack-unit keyword and the unit ID. Range is 0–
7.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Example
Dell#show power detail pe 2 stack‐unit 1
Unit Total System Redundancy Inline Inline Inline Inline
Inline
Power Power Power Power Power Power
Power Power
Available Consumed Consumed Threshold Available
Allocated Consumed Remaining
(Watts) (Watts) (Watts) (%) (Watts) (Watts)
(Watts) (Watts)
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
2/1 2000.00 150 150 90 1530.00 308.00
190.00 1222.00
1654
Port Extenders (PE)