Reference Guide

• peGigE pe-id/stack-unit/port
isolated (OPTIONAL) Enter the keyword isolated and a PVLAN ID
number to display the configuration of an isolated PVLAN.
mapping (OPTIONAL) Enter the keyword mapping to display the
community and isolated PVLAN mapping to primary
PVLANs.
primary vlan-id (OPTIONAL) Enter the keyword primary and a PVLAN ID
number to display the configuration of a primary PVLAN.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information
Examples of all types of command output are shown below. The first type of
output is the result of not entering an optional keyword. It displays a detailed list of
all PVLANs and their member VLANs and interfaces. The other types of output
show details about PVLAN subsets.
The following describes the show private-vlan command shown in the
Examples below.
Field Description
Primary Displays the VLAN ID of the designated or associated
primary VLAN(s).
Secondary Displays the VLAN ID of the designated or associated
secondary VLAN(s).
Type Displays the type of VLAN in which the listed interfaces
reside.
Private VLAN (PVLAN)
1673