Reference Guide

Example
Dell# show vlan private-vlan 10
Primary Secondary Type Active Ports
------- --------- --------- -------------------
10 primary Yes Te 2/1,3
102 isolated Yes Te 0/4
101 community Yes Te 2/7-10
Example
Dell#show vlan private-vlan 102
Primary Secondary Type Active Ports
------- --------- --------- --------------------
10 Primary Yes Po 1
Te 0/2
102 Isolated Yes Te 0/4
Related
Commands
private-vlan mode – sets the mode of the selected VLAN to community, isolated,
or primary.
show interfaces private-vlan – displays type and status of PVLAN interfaces.
switchport mode private-vlan – sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
C9000 Series
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode
private-vlan command.
Parameters
host Enter the keyword host to configure the selected port or
port channel as an isolated interface in a PVLAN.
promiscuous Enter the keyword promiscuous to configure the selected
port or port channel as a promiscuous interface.
trunk Enter the keyword trunk to configure the selected port or
port channel as a trunk port in a PVLAN.
Defaults Disabled.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Private VLAN (PVLAN)
1675