Reference Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced.
Usage Information
By default, when rate policing and shaping, the system does not include the
Preamble, SFD, or the IFG fields. These fields are overhead; only the fields from
MAC destination address to the CRC are used for forwarding and are included in
these rate metering calculations.
service-class bandwidth-percentage
Specify a minimum bandwidth for queues.
C9000 Series
Syntax
service-class bandwidth-percentage queue0 percentage queue1
percentage queue2 percentage queue3 percentagequeue4 percentage
queue5 percentage queue6 percentage
Parameters
percentage Enter the bandwidth-weight as a percentage. The range is
from 1 to 100.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
Usage Information Guarantee a minimum bandwidth to different queues globally using the service-
class bandwidth-percentage command from CONFIGURATION mode. The
command is applied in the same way as the
bandwidth-percentage command
in an output QoS policy. The bandwidth-percentage command in QOS-
1678
Quality of Service (QoS)