Reference Guide

Defaults Burst size is 100KB. peak-rate is by default the same as committed-rate.
Granularity for committed-rate and peak-rate is Mbps unless you use the kbps
option.
Command Modes QOS-POLICY-IN
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-
Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information The default burst size is 100Kb. If a different value is required, you must configure
the burst size to the required value.
Related
Commands
rate shape — shapes traffic output as part of the designated policy.
qos-policy-input — creates a QoS output policy.
rate-shape
Shape traffic output as part of an output QoS policy.
C9000 Series
Syntax
rate-shape {kbps | pps} peak-rate {burst-kbps | burst-packets}
[committed {kbps | pps} committed-rate {burst-kbps | burst-
packets}]
Parameters
kbps Enter the keyword kbps to specify the rate limit in kilobits
per second (Kbps) in multiples of 64. The default granularity
is Megabits per second (Mbps).The range is from 0 to
40000000.
Quality of Service (QoS)
1707