Reference Guide

Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL.
Example
Dell#show userroles
Role Inheritance Modes
netoperator Exec
netadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
secadmin Exec Config
sysadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
netoperator
testadmin netadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
userrole
Create user roles for the role-based security model.
C9000
Syntax
userrole name inherit existing-role-name
To delete a role name, use the no userrole name command. Note that the reserved
role names may not be deleted.
Parameters
name Enter a text string for the name of the user up to 63
characters. It cannot be one of the system defined roles
(sysadmin, secadmin, netadmin, netoperator).
inherit existing-
role-name
Enter the inherit keyword then specify the system defined
role to inherit permissions from (sysadmin, secadmin,
netadmin, netoperator).
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL.
Usage Information
Instead of using the system defined user roles, you can create a new user role that
best matches your organization. When you create a new user role, you first inherit
permissions from one of the system defined roles. Otherwise you would have to
create a user role from scratch. You then restrict commands or add commands to
Security
1799