Reference Guide

Commands

• show util-threshold memory – Display the configured values of memory

utilization thresholds.

• show util-threshold cpu – Display the configured values of CPU utilization

thresholds.

virtual-ip

Configure a virtual IP address for the active management interface. You can configure virtual addresses

both for IPv4 and IPv6 independently.

C9000 Series

Syntax

virtual-ip {ipv4-address | ipv6-address}

To return to the default, use the no virtual-ip {ipv4-address | ipv6-

address} command.

Parameters

ipv4-address Enter the IP address of the active management interface in a

dotted decimal format (A.B.C.D.).

ipv6-address Enter an IPv6 address of the active management interface,

in the x:x:x:x::x format.

NOTE: The :: notation specifies successive hexadecimal

fields of zeros.

Defaults none

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

9.0.0.0 Introduced on the Z9000

8.3.19.0 Introduced on the S4820T.

Control and Monitoring

183