Reference Guide

Version Description
7.6.1.0 Introduced on the C-Series, S-Series, and E-Series.
Usage Information
If the host responds to 802.1X with an incorrect login/password, the login fails. The
switch attempts to authenticate again until the maximum attempts configured is
reached. If the authentication fails after all allowed attempts, the interface is moved
to the authentication failed VLAN.
After the authentication VLAN is assigned, the port-state must be toggled to restart
authentication. Authentication occurs at the next re-authentication interval (dot1x
reauthentication
).
Related
Commands
dot1x port-control — enables port-control on an interface.
dot1x guest-vlan — configures a guest VLAN for non-dot1x devices.
show dot1x interface — displays the 802.1X information on an interface.
dot1x auth-server
Configure the authentication server to RADIUS.
C9000 Series
Syntax
dot1x auth-server radius
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Security
1845