Reference Guide

ip ssh connection-rate-limit
Configure the maximum number of incoming SSH connections per minute.
C9000 Series
Syntax
ip ssh connection-rate-limit 1-10
Parameters
1-10 Enter the number of maximum numbers of incoming SSH
connections allowed per minute. The range is from 1 to 10
per minute. The default is 10 per minute.
Defaults 10 per minute
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
ip ssh hostbased-authentication
Enable hostbased-authentication for the SSHv2 server.
C9000 Series
Syntax
ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the no ip ssh
hostbased-authentication enable command.
Parameters
enable Enter the keyword enable to enable hostbased-
authentication for SSHv2 server.
Defaults Disabled.
Security
1861