Reference Guide

• ets — Enable notification of ETS changes.
• fips — Enable notification of a FIP Snooping state
changes.
• hg-lbm — Enable notification of hiGig link-bundle state
changes.
• isis — Enable notification of IS-IS adjacency state
changes.
• pfc — Enable notification of changes to PFC.
• lacp — Enable notification of LACP state changes.
• snmp — Enable SNMP notifications defined in RFC 1157.
• stp — Enable notification of a state change in the
spanning tree protocol (RFC 1493).
• vlt — Enable notification of VLT state changes.
• vrrp —Enable notification of a state change in a VRRP
group.
• xstp — Enable notification of a state change in MSTP
(802.1s), RSTP (802.1w), and PVST+.
notification-
option
For the envmon notification-type, enter one of the following
optional parameters:
• cam-utilization
• fan
• supply
• temperature
For the snmp notification-type, enter one of the following
optional parameters:
• authentication
• coldstart
• linkdown
• linkup
Defaults Not enabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.1(0.0) Added support for copy-config and ecmp traps.
1918
Simple Network Management Protocol (SNMP) and Syslog