Reference Guide

pe pe-id Enter the keyword pe and the port extender ID to display
the driver log information for the specified port extender.
Port extender ID range is from 0 to 255.
stack unit-
number
Enter the keyword stack-unit and the unit number to
display the driver log information for the specified stack-
unit. Stack unit range is from 0 to 7.
defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
Usage Information
This command displays internal software driver information, which may be useful
during troubleshooting switch initialization errors.
Examples
Dell# show logging driverlog cp
0:Task(dlm): [ 6472921]EEPROM LIB ERR: decipherPpId:349 PPID
ERROR: Mismatching VID and MFGID
1:Task(dlm): [ 101]EEPROM LIB ERR: decipherPpId:379
Invalid svcTag(n/a)
2:Task(dlm): [ 93]EEPROM LIB ERR: decipherPpId:390
strtoull invalidates svcTag(n/a): errno(0), *enr(/)
3:Task(dlm): [ 40]EEPROM LIB ERR: decipherPpId:416
svcTag invalid changing it to NA
4:Task(chmgr): [ 1555744]EEPROM LIB ERR: decipherPpId:349
PPID ERROR: Mismatching VID and MFGID
5:Task(chmgr): [ 50]EEPROM LIB ERR: decipherPpId:379
Invalid svcTag(n/a)
6:Task(chmgr): [ 42]EEPROM LIB ERR: decipherPpId:390
strtoull invalidates svcTag(n/a): errno(0), *ptr(/)
7:Task(chmgr): [ 39]EEPROM LIB ERR: decipherPpId:416
svcTag invalid changing it to NA
Dell# show logging driverlog linecard 0
Simple Network Management Protocol (SNMP) and Syslog
1957