Reference Guide

Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
Usage Information
Include the colon (:) when entering this command.
CAUTION: This command deletes all files, including the startup
configuration file. So, after executing this command, consider saving the
running config as the startup config (use the write memory command or
copy run start command).
You can also use the format command from the port extender (PE) console to
erase all files from the flash or USB flash.
mkdir
Create a directory on the NFS mounted file system.
C9000 Series
Syntax
mkdir nfsmount://mount-point/usrname
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced this command.
Example
Dell#mkdir nfsmount:/nfs-mountpoint/guest
Related
Commands
rmdir – removes a directory.
File Management
197