Reference Guide

clear-all Enter the keyword clear-all to reset the Bootvar, NvRam, and
configurations.
nvram Enter the keyword nvram to reset the NvRAM only.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.17.1 Supported on the M I/O Aggregator.
Usage Information
Restoring factory defaults deletes the existing startup configuration and all persistent settings
(stacking, fanout, and so forth).
When restoring factory default settings, a switch remains in standalone mode after the
restoration. After the restore is complete, the units power cycle immediately.
CAUTION: There is no undo for this command.
Example
Dell#restore factory-defaults chassis clear-all
***********************************************************************
* Warning - Restoring factory defaults will delete the
existing *
* startup-config and resets all persistent settings
(stacking, *
* fanout, etc.) and boot environment variables (boot config,
console *
* baud rate, management interface settings,
etc.) *
* After restoration the unit(s) will be powercycled
immediately. *
* Proceed with
caution ! *
***********************************************************************
Proceed with factory settings? Confirm [yes/no]:
rmdir
Remove a directory from the NFS mounted file system.
C9000 Series
Syntax
rmdir nfsmount://mount-point/usrname
File Management
201