Reference Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.4 Output expanded to display current reload mode (normal or
Jumpstart).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
Dell#show bootvar
PRIMARY IMAGE FILE = ftp://ftp:ftp@10.11.227.233/tftpboot/
FTOS-VG-1-0-0-4079.bin
SECONDARY IMAGE FILE = ftp://ftp:ftp@10.11.227.233/tftpboot/
FTOS-VG-1-0-0-4046.bin
DEFAULT IMAGE FILE = system://A
LOCAL CONFIG FILE = variable does not exist
PRIMARY HOST CONFIG FILE = variable does not exist
SECONDARY HOST CONFIG FILE = variable does not exist
PRIMARY NETWORK CONFIG FILE = variable does not exist
SECONDARY NETWORK CONFIG FILE = variable does not exist
CURRENT IMAGE FILE = ftp://ftp:ftp@10.11.227.233/tftpboot/
FTOS-VG-1-0-0-4079.bin
CURRENT CONFIG FILE 1 = flash://startup-config
CURRENT CONFIG FILE 2 = variable does not exist
CONFIG LOAD PREFERENCE = local first
BOOT INTERFACE GATEWAY IP ADDRESS = 10.11.93.254
Reload Mode = normal-reload
Related
Commands
boot system — sets the location of Dell Networking OS image files.
show file
Display contents of a text file in the local filesystem.
C9000 Series
Syntax
show file filesystem
From a PE console, use show file filesystem to view the contents of a text
file.
Parameters
filesystem Enter one of the following:
• For internal flash, enter flash:
• For USB flash, enter usbflash:
File Management
205