Reference Guide

Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Removed the default value on the S-Series and Z-Series.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Usage Information In a square VLT topology with a single link connecting to the remote peers, If a VLT
peer goes down, the local VLT node must be prompted to stop transmitting it’s
peer’s MAC address. You can configure the peer-timeout value command to
stop the local VLT node from transmitting the peer MAC address within the
configured peer timeout value. The default timeout value is infinity. You must
enable the vlt-peer-mac transmit to configure a peer time out value.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# peer-timeout 5
proxy-gateway static
Enable the proxy-gateway feature using static configurations.
C9000 Series
Syntax
[no] proxy-gateway static
Command Modes VLT DOMAIN
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000.
Usage Information
When proxy-gateway static configuration is added, the setting is saved in the Layer
2 module. When you remove the static proxy gateway configuration, each proxy-
gateway static mac configured is deleted from the Layer 2 module.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
remote-mac-address exclude-vlan
Configure the proxy-gateway static entry and exclude a VLAN or a range of VLANs from proxy routing.
C9000 Series
Syntax
[no] remote-mac-address mac—address [exclude-vlan vlan-range]
Virtual Link Trunking (VLT)
2067