Reference Guide

static Display details about the static VLT proxy gateway
configuration
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON.
9.7(0.1) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information
At any point of time the proxy-gateway feature may go operationally down for the
following reasons,
1) LLDP globally disabled
2) LLDP disabled per port
3) VLT port-channel is down
4) LLDP neighbor down
So, the proxy-gateway feature could be operationally down though properly
configured and this will be reported in the “show command”.
When more than one VLT port-channel terminates on the same TOR, output of the
show VLT proxy-gateway info lldp command may show the port-channel
id incorrectly.
Example
Dell#show vlt proxy-gateway
VLT Proxy Gateway Brief
-------------------------
Config Mode: LLDP
Global LLDP Config Status: Enabled
peer-mac-transmit Status: Disabled
Dell#show vlt proxy-gateway info static
Mac Address Exclude Vlan
----------- ------------
00:01:e8:8a:e8:f7 3,7-8
00:01:e8:8b:1c:c0 3,7-8
Dell#show vlt proxy-gateway info lldp
LagId Mac Address Exclude Vlan
----- ----------- ------------
Po 55 00:01:e8:8a:e8:f7 3,7-8 << Macs learnt via port-channel
55
Virtual Link Trunking (VLT)
2069