Reference Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Example
Dell#clear counters vrrp vrf indus
Clear "show vrrp" counters of all vrrp groups on all
interfaces in VRF indus [confirm] yes
debug vrrp
Enable debugging of VRRP.
C9000 Series
Syntax
debug vrrp interface [vrrp-id] {all | bfd | database |
interface | ipv6 | packets | state | timer}
To disable debugging, use the no debug vrrp interface [vrrp-id] {all |
bfd | database | interface | ipv6 | packets | state | timer}
command.
Parameters
interface Enter the following keywords and slot/port or number
information
• For Port Channel interface types, enter the keywords
port-channel then the number. The range is from 1 to
128.
• For a 40-Gigabit Ethernet interface, enter the keyword
FortyGigabitEthernet then the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN interface, enter the keyword vlan then the
VLAN ID. The VLAN ID range is from 1 to 4094.
vrrp-id (OPTIONAL) Enter a number from 1 to 255 as the VRRP
group ID.
all Enter the keyword all to enable debugging of all VRRP
groups.
2074
Virtual Router Redundancy Protocol (VRRP)