Reference Guide

mode do not inherit the global BFD enable/disable values configured with the

bfd all-neighbors command or configured for the peer group to which a

neighbor belongs. The neighbors inherit only the global timer values.

You can only enable BFD for VRRP in INTERFACE command mode (vrrp bfd

all-neighbors

Commands

show bfd neighbors — displays BFD neighbor information on all interfaces or a

specified interface.

neighbor bfd disable — explicitly disables a BFD session with a BGP neighbor or a

BGP peer group.

bfd disable

Disable BFD on an interface.

C9000 Series

Syntax

bfd disable

Re-enable BFD using the no bfd disable command.

Defaults BFD is disabled by default.

Command Modes VRRP

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

9.2(0.0) Introduced on S4810.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.2.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the C-Series.

7.5.1.0 Introduced on the E-Series.

372

Bidirectional Forwarding Detection (BFD)