Reference Guide

Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced
Related
Commands
• clear ip bgp – enables route reflection between route reflector and clients.
• show capture bgp-pdu neighbor – configures a route reflector and clients.
• capture bgp-pdu neighbor – enables capture of an IPv4 BGP neighbor packet.
clear ip bgp ipv6-address
Reset BGP sessions specific to an IPv6 address. The soft parameter (BGP Soft Reconfiguration) clears the
policies without resetting the TCP connection.
C9000 Series
Syntax
clear ip bgp ipv6-address [flap-statistics | ipv4 {multicast
{flap-statistics | soft {in | out}} | unicast {flap-statistics
| soft {in | out}} | ipv6 unicast {flap-statistics | soft {in |
out}| soft [in | out]
Parameters
ipv6-address Enter an IPv6 address to reset neighbors belonging to that
IP. Used without a qualifier, the keyword resets all neighbors
belonging to that IP.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to
clear all flap statistics belonging to that AS or a specified
address family within that IP.
ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for
that address family.
ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for
that address family.
unicast (OPTIONAL) Enter the keyword unicast to select the
unicast option within the selected address family.
multicast (OPTIONAL) Enter the keyword multicast to select the
multicast option within the selected address family.
Multicast is supported on IPv4 only
Border Gateway Protocol
547