Reference Guide

Version Description
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information Enter the no debug ip bgp command to remove all configured debug
commands for BGP.
debug ip bgp updates
Allows you to view information about BGP updates.
C9000 Series
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name | ipv6
unicast [ipv6-address]] updates [in | out | prefix-list prefix-
list-name]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name | ipv6 unicast [ipv6-address]] updates [in |
out] command.
Parameters
ipv6-address (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
followed by the prefix length in the /x format. The range
is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group peer-
group-name
(OPTIONAL) Enter the keywords peer-group followed by
the name of the peer group.
in (OPTIONAL) Enter the keyword in to view BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view BGP
notifications updates sent to neighbors.
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information Enter the no debug ip bgp command to remove all configured debug
commands for BGP.
558
Border Gateway Protocol