Reference Guide

ICMPV6 NA any any _ Q3/Q11 CP/
RP 600
ICMPV6 RA any any _ Q3/Q11 CP/
RP 600
ICMPV6 NS any any _ Q2/Q10 CP/
RP 600
ICMPV6 RS any any _ Q2/Q10 CP/
RP 600
ICMPV6 any any _ Q5
CP 300
VRRPV6 any any _ Q15
RP 400
OSPFV3 any any _ Q15
RP 2500
show mac protocol-queue-mapping
Display the CPU queue mapping for MAC protocols.
C9000 Series
Syntax
show mac protocol-queue-mapping
Defaults Not configured.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell#show mac protocol-queue-mapping
Protocol Destination Mac EtherType Queue
EgPort Rate (kbps)
-------- --------------- --------- -----
------ -----------
ARP any 0x0806 Q1/Q8/Q2/
Q9 CP/RP 100
FRRP 01:01:e8:00:00:10/11 any
Q19 LP 300
LACP 01:80:c2:00:00:02 0x8809
Q13 RP 500
LLDP any 0x88cc
632
Control Plane Policing (CoPP)