Reference Guide

Control and Monitoring

This chapter contains the commands to configure and monitor the system, including Telnet, file transfer

protocol (FTP), and trivial file transfer protocol (TFTP) as they are implemented in the Dell Networking OS

on the switch.

asf-mode

Enable the transmission of Alternate Store and Forward (ASF) packets as soon as a threshold is reached.

C9000 Series

Syntax

asf-mode linecard {slot-id | all}

To return to standard Store and Forward mode, use the no asf-mode linecard

command.

Parameters

linecard slot-id Enter the slot ID of a switch line card. The range of slot IDs

is from 0 to 11. Enter all to enable ASF mode on all line

cards on the switch.

Defaults Not configured

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.0 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

Control and Monitoring