Reference Guide

Commands

• banner exec — enables the display of a text string when you enter EXEC mode.

• banner login — sets a banner to display after successful login to the system.

cam-acl

Allocate content addressable memory (CAM) for IPv4 and IPv6 ACLs.

C9000 Series

Syntax cam-acl {default | l2acl number{ ipv4acl number ipv6acl number ipv4qos number

l2qos number l2pt number ipmacacl number vman-qos | vman-dual-qos number

ecfmacl number [ openflow number fcoeacl number | fedgovacl number|

nlbclusteracl number | ipv4pbr number | iscsioptaclnumber | openflow number |

vrfv4ac numberl ]}}

Parameters

default Use the default CAM profile settings and set the CAM as

follows:

• L3 ACL (ipv4acl): 4

• L2 ACL(l2acl): 5

• IPv6 L3 ACL (ipv6acl): 0

• L3 QoS (ipv4qos): 2

• L2 QoS (l2qos): 1

• OpenFlow: 0 (disabled)

• FCoE (fcoeacl): 0 (disabled)

• iSCSI Optimization (iscsioptacl): 0 (disabled)

• L2 PT : 0

• IP-MAC ACL : 0

• Vman QoS : 0

• ECFM ACL: 0

• IPv4 PBR : 0

• VRFv4 ACL : 0

• FedGov ACL : 0

• NLB Cluster ACL : 0

l2acl number

Allocate space to each CAM region.

Enter the CAM profile name then the amount for CAM space

allocation. The total space allocated must be equal to 12.

The IPv6 ACL range must be a factor of 2.

Control and Monitoring