Reference Guide

debug fip snooping
Enable debugging on FIP snooping.
C9000 Series
Syntax
debug fip-snooping [all | acl | error | ifm | info | ipc | tx |
rx ]
Parameters
all Enter the keyword all to enable debugging on all the
options.
acl Enter the keyword acl for ACL-specific debugging.
error Enter the keyword error for error-specific debugging.
ifm Enter the keyword ifm for IFM-specific debugging.
info Enter the keyword info for information-specific debugging.
ipc Enter the keyword ipc for IPC-specific debugging.
tx Enter the keyword tx for packet transmit-specific
debugging.
rx Enter the keyword rx for packet receive-specific
debugging.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.x.x.x Introduced on the C9000 Series.
9.2(0.2) Added the tx parameter.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
800
FCoE Transit