Reference Guide

synchronized consists of configuration data, operational data, state and status, and
statistics depending on the Dell Networking OS version.
show redundancy
Display the current redundancy configuration.
C9000 Series
Syntax
show redundancy pe pe-id
From a PE console, use show redundancy to view the current high availability
(HA) status for a specified port extender unit.
Parameters
pe pe-id Enter the keyword pe and the port extender ID to display
the current redundancy configuration of the specified port
extender unit. Range is from 0 to 255
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
Usage Information To modify your results, use the show redundancy [pipe] command, as follows:
• except — show only text that doesn not match a pattern.
• find — search for the first occurrence of a pattern.
High Availability (HA)
857